Introduction

● CMPT124G-128 Series melt pressure transducer is ideal for space restricted areas applications required, where mounting space is limited. 
● It also has a free-spinning jam nut that simplifies installation. 
● The series comes equipped with six or eight pin bendix connector. 
● It can be interchangeable with the similar world standard products. 
● It is suitable to measure and control the melt pressure in chemical fiber equipment, rubber and plastic machine and so on.

● High-standard quality
● Accuracy better than ±0.5%
● Stainless steel wetted parts
● Internal 80% Shunt Calibration
● Internal 80% calibration
● Good stability and repeatability
● Exposed, bendable capillary

Application

● Chemical fiber Equipment
● Polyester equipment
● Other pressure measure and control

Specifications

● Pressure range: 0-3.5MPa…0-150MPa(0-500psi…0-20000psi)
● Over Pressure: 1.5 X FSO
● Combined Error: ± 0.5% FSO  (Including Linearity, Repeatability & Hysteresis)
● Output: 3.33 mV/V, 2mV/V
● Input Voltage: 10VDC
● Repeatability: +/- 0.2%FSO
● Bridge Resistance: Input: 345 Ohms minimum
● Output: 350 Ohms +/- 10%
● Internal Shunt Calibration (R-Cal): 80% FSO +/- 1%
● Insulation Resistance: 200 megohms @ 100 Vdc
● Max Diaphragm Temperature: 350℃
● Mounting Torque: 500 inch/lbs. maximum
● Standard Wetted Parts: Diaphragm coated 15-5 PH SST
● Process connector: 1/2″-20UNF, M14×1.5, M18×1.5 Optional

Melt pressure transducer product size diagram

Note

We provide FREE samples for your test!
Purchase only when you are satisfied with the FREE samples.
Please contact us to apply FREE Trial NOW !!
* Please let us know what kind of model, measuring range, output, the screw thread & electric connection type, accuracy, and diameter.
* Or tell us your techincal requirement for the sensor selection.
* OEM/ODM is welcomed.

Package
* All our sensors will be well packed with bubble & carton. (Bubble packing→4 small carton→1 big carton)
* You can choose your own label(Screen Print or Laser Engraving).
* Can be netural packing or OEM.

Shipping

* Products are shipped via UPS / DHL/ FedEx / TNT, etc. (door to door), or air & sea shipment for larger qty.
* L/T: 3-7 days upon receiving payment if the qty is lower than 1000PCS and it is not customized products.
* Shipping via DHL. UPS. FedEx and TNT express usually takes 3~7days dependent on the destination country.
Warranty
* We provide 1 year warranty.
* If the product is defective, please notify us within 3 days after receiving.
* All products must be returned on their original condition, in order to qualify for a refund or exchange of goods.
Our Commitment
Better Price than other suppliers for you because of Factory Direct Sale;
Better Quality than before caused by our 10+ years experience about sensors;
Fast Delivery made by our Enthusiasm;
Timing Reply in 24 hours all about our TEAM's Passion & Patience.