Introduction

● CMPT124B-126 Series Melt Pressure Transmitter (Flange type) adopts special construction design and excellent alloy elastic membrane to reduce the thermal draft and improve measurement accuracy . 
● The zero & full span can be calibrated, with amplify signal be connected with PLC and 80% calibration inside. 
● It has wide application of pressure measurement & control for melt-temp liquid for chemical and fiber equipment, polyester equipment, etc.

Feature

● High-standard quality
● Stainless steel Seal
● Simple Installation
● Completely interchange similar import products
● Excellent stability and repetition

Specifications

● Pressure range: 0-3.5MPa…0-150MPa(0-500psi…0-20000psi)
● Over Pressure: 1.5 X FSO
● Combined Error: ± 1.0% FSO  (Including Linearity, Repeatability & Hysteresis)
● Output: 4-20mA, 0-10V, 0-5V
● Input Voltage: 24VDC
● Repeatability: +/- 0.2%FSO
● Bridge Resistance: Input: 345 Ohms minimum
● Output: 350 Ohms +/- 10%
● Internal Shunt Calibration (R-Cal): 80% FSO +/- 1%
● Insulation Resistance: 200 megohms @ 100 Vdc
● Max Diaphragm Temperature: 350℃
● Mounting Torque: 500 inch/lbs. maximum
● Standard Wetted Parts: Diaphragm coated 15-5 PH SST
● Process connector: Flange mounting

Flanged melt pressure transmitter product size diagram

Application 

● Chemical fiber & spinning Equipment
● Plastic and rubber, polyester process equipment
● Other pressure measurement and Control